Main Menu
Main Menu
Home
Search
Members
View the memberlist
Search for Members
Discover Seattle!
►
General Category
►
Discover Seattle!
►
Any info on working with arborite ?
Any info on working with arborite ?
Started by P.C., Mar 18 06 01:08
Previous topic
-
Next topic
Print
|
Go Down
Pages
1
User actions
P.C.
Administrator
SuperHero Member
Posts: 14,496
Logged
Any info on working with arborite ?
Mar 18 06 01:08
Has anyone done this ? I can't believe a google search is not turning up this info.
I'm trying to figure out how to get that 'beveled edge' on the corners of arborite. Is this just done with a router or is it planed
? Any help would be greatly appreciated.
Sir Isaac Newton invented the swinging door....for the convenience of his cat.
TehBorken
Administrator
SuperHero Member
Posts: 6,068
WWW
Location: Seattle WA
Logged
Re: Any info on working with arborite ?
#1
Mar 18 06 01:27
P.C. wrote:
I'm trying to figure out how to get that 'beveled edge' on the corners of arborite. Is this just done with a router or is it planed
?
It's done with a router. I've seen jigs that hold a plane at the right angle to do it but it never works right. Hardware stores sell a particular kind of router blade made for beveling Formica and Arborite and similar materials.
The real trouble with reality is that there's no background music.
P.C.
Administrator
SuperHero Member
Posts: 14,496
Logged
Re: Any info on working with arborite ?
#2
Mar 18 06 01:31
Excellent TehBorken. Thanks so much. I don't want to screw this up. At 60 bucks a sheet, and three sheets for the job. I knew there had to be something....just didn't know what it was.
Sir Isaac Newton invented the swinging door....for the convenience of his cat.
Witch
Full Member
Posts: 168
Logged
Re: Any info on working with arborite ?
#3
Mar 18 06 09:48
And spend the extra couple of bux for the carbide bit. If you cheap out and try to use the high speed steel bits you'll only end up burning and chipping the arborite
P.C.
Administrator
SuperHero Member
Posts: 14,496
Logged
Re: Any info on working with arborite ?
#4
Mar 18 06 09:54
Thanks witch....I never cheap out on tools. The old adage, 'A poor workman blames his tools' doesn't apply when you cheap out. Good advice.
Sir Isaac Newton invented the swinging door....for the convenience of his cat.
Print
|
Go Up
Pages
1
User actions
Discover Seattle!
►
General Category
►
Discover Seattle!
►
Any info on working with arborite ?
User actions
Print